The RG28 converts 28 VDC input voltage to a regulated 14 VDC output voltage.
The 14 VDC output is buck converted from the input voltage and therefore the output voltage is not isolated from the input.
A state of the art ""Synchronous Current Mode Switching"" topology with Surface Mount Technology (SMT) is used to realize the power conversion. Control circuitry includes use of a popular Synchronous PWM controller for voltage regulation and overload current limit.
友情提醒：件号：RG28 相关介绍完善中 / 部分技术参数正在核实，当前信息仅供参考，最终订货请以实际件号、原厂资料及 IPC 手册为准。
规格：
Weight:
1.2 lb
Dimensions:
2.75 x 6.875 x 2.24 in.
Input Voltage:
28 Vdc NOM., 22 to 32 Vdc
Input Current:
10.8 Amps typ at 28 Vdc input & @FL
0.3 Amps maximum at no load
Output Voltage:
14 Vdc regulated
Output Current:
0-20 Amps continuous
Power Output:
280 Watts continuous
420 Watts for a minimum of 5 minutes
Regulation:
1% for line, 1% for load and 1% for temperature
Overload (OL):
Deliver 110% output power for 2 hours minimum.
Protection (OL):
Withstands without damage or degradation loads exceeding 110% to an output short circuit. Unit delivers rated output power upon removal of the overload condition
Protection (SC):
Under a output short circuit condition, the current is limited to approximately 37.5 Amps
Efficiency:
92% typical
Temperature:
-55° C to +71° C
Cooling:
Convection and thermal conduction through the bottom plate (No internal fan)
Altitude:
55,000FT
Compliance:
FAA TSO-C71
Environmental:
DO-160D/C by test, design similarity and/or design analysis per:
F2-BBB[STX]EWXDFSABAZZXLXXXX
Finish:
Gold iridite per MIL-C-5541 Class 1A
特征：
Converts 28 VDC to 14 VDC
280 W continuously at 14 VDC (20 amperes output)
Synchronous current mode switching
Surface mount technology
Output short circuit current limit protection
Output shuts down when the voltage feedback loop is opened
TSO'd
