The ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna allowing the GPS receiver to power both the antenna and the splitter’s internal amplifier. The other RF output (J2) is DC blocked and incorporates a 200Ω resistor to simulate the antenna current draw preventing false antenna alarm faults.
友情提醒：产品介绍及参数仅供参考，如需该件号：ALDCBS1X2-SMA 的详细技术规格，请随时联系我们>>>，航空器材网将为您提供精准的技术支持和解决方案。
规格：
Weight:
11 oz (316 g)
Dimensions:
1.3 x 3.25 x 2.5 in, not including connectors
Operating Temperature:
-40°C to 75°C
Finish Housing and Base Plate:
electroless nickel plated MIL-C-26074C class 1, 0.0001 to 0.0003 max
Finish Lid:
anodize, TYPE II, class 2, black, per MIL-A-8625
Frequency Range:
1.1 to 1.7 GHz
Impedance:
50Ω
Gain:
21 to 23 dB, 22 dB typical
Input SWR:
2.0:1
Output SWR:
1.5:1
Noise Figure:
3.3 dB typical, 3.5 maximum
Gain Flatness:
0.5 dB typical, 1.0 dB maximum
Amplitude Balance:
0.5 dB typical, 1.5 dB maximum
Phase Balance:
1.0°
Isolation:
16 to 24 dB
Group Delay Flatness:
1 ns
Pi dB:
-10 dBm
特征：
This ALDCBS1X2 GPS amplified splitter(EDMO# ALDCBS1X2S)includes one input and two outputs each with BNC connectors.
Excellent gain flatness for all GNSS frequencies
Provides a typical amplifier gain of 22 dB
Extremely flat group delay with a variation less than 1 ns
Phase matched outputs (less than 1.0°)
Prevents antenna alarm faults from connected devices with 200Ω DC blocked outputs
