The ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J8) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.
友情提醒：件号：ALDCBS1X8-BNC 相关介绍完善中 / 部分技术参数正在核实，当前信息仅供参考，最终订货请以实际件号、原厂资料及 IPC 手册为准。
规格：
Weight:
10 oz (286 g)
Dimensions:
1.3 x 5.25 x 2.5 in, not including connectors
Operating Temperature:
-40°C to 75°C
Finish Housing and Base Plate:
electroless nickel plated MIL-C-26074C class 1, 0.0001 to 0.0003 max
Finish Lid:
anodize, TYPE II, class 2, black, per MIL-A-8625
Frequency Range:
1.1 to 1.7 GHz
特征：
This ALDCBS1X8 GPS amplified splitter(EDMO# ALDCBS1X8B)includes one input and eight outputs each with BNC connectors.
Excellent gain flatness for all GNSS frequencies
Provides a typical amplifier gain of 14 dB
Extremely flat group delay with a variation less than 1 ns
Phase matched outputs (less than 1.0)
Prevents antenna alarm faults from connected devices with 200 DC blocked output
