This rack mount amplified splitter features dual antenna inputs and 16 output ports that cover the L1 and L2 GPS frequency bands with excellent gain flatness. In the normal configuration, the splitter is powered by a receiver connector to J1 powering the splitter's amplifier and roof antenna. The output ports have a 200Ω load which simulates antenna draw to prevent antenna alarm faults. This dual antenna, 16-output unit is ideal where a GPS carrier signal is required by up to 16 GPS devices at once.
This dual antenna, rack mount splitter(EDMO# DRMALDCBS2)features two inputs and 16 outputs, 48 VDC power option, and high isolation option.
友情提醒：件号：DRMALDCBS2X16 相关介绍完善中 / 部分技术参数正在核实，当前信息仅供参考，最终订货请以实际件号、原厂资料及 IPC 手册为准。
规格：
Weight:
12.2 lb
Dimensions:
5.4 x 18 x 17 in
Operating Temperature:
-40°C to 75°C
Frequency Range:
1.1 GHz — 1.7 GHz
In/Out Impedance:
50Ω
Gain:
13 dB — 15 dB (14 dB, typical)
Gain High Isolation:
-2.0 dB — 2.0 dB (0.0 dB, typical)
Input SWR:
2.0:1, max.
Output SWR:
1.5:1, max.
Noise Figure:
3.8 dB, typical (4.3 dB, max)
Gain Flatness:
0.5 dB, typical (1.0 dB, max.)
Amplitude Balance:
1.5 dB, max.
Phase Balance:
1.0°
Group Delay Flatness:
5 ns, max.
Current Draw:
15 mA, max.
特征：
Dual antenna input
Excellent gain flatness: <1.5 dB between L1 & L2
14 dB amplified gain
200Ω resistors on DC blocked output ports
LED power light
-48 VDC power option available
Durable and rugged 3U chassis
Extremely flat group delay
High isolation option available
Phase matched outputs: <1° between J1 & J2
|
