This loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.
This passive GPS splitter(EDMO# LDCBS1X4T)has one input and four output ports and has TNC connectors.
友情提醒：件号：LDCBS1X4-TNC 相关介绍完善中 / 部分技术参数正在核实，当前信息仅供参考，最终订货请以实际件号、原厂资料及 IPC 手册为准。
规格：
Weight:
11.7 oz (332 g)
Dimensions:
1.3 x 3.25 x 2.5 in, max. (not including connectors)
Operating Frequency:
-57°C to 87°C
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-6.5 dB to -8.5 dB (-7.5 dB, typical)
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.15 dB, typical (1.0 dB, max.)
Phase Balance:
2.0°, max.
Isolation:
L1: 22 dB, min. (25 dB, typical)
L2: 15 dB, min. (25 dB, typical)
Group Delay Flatness:
0.1 ns, typical (1.0 ns, max.)
Connector Option:
TNC connector
特征：
Precise amplitude balance: <1 variation between ports
Flat group delay: <1 ns variation between L1 & L2
Low insertion loss: -7.5 dB loss typical across operating frequencies
Wide accepted frequency range: cover entire L-band & major GNSS constellations
Efficiently block ports: 200Ω resistors prevent antenna alarm faults
Matched phase balance: 2° variation between ports
