The BatteryMINDer Model 1510 features a SmarTECHnolgy plug-n-run 1.5 amp battery charger/maintainer with a full-time, automatic high frequency pulse desulfator that extends a batterys life up to four times its normal life. The Model 1510 is ideal for charging, maintaining, and recovering of 12-volt flooded, sealed, maintenance-free, starter, deep-cycle, Optima brand sealed AGM, and marine batteries. This unit has a wide 90-240 VAC and 47-63 Hz input voltage range allowing it to operate worldwide. It is also capable of maintaining up to four batteries at a time (6 or 12 volt connected in parallel) by using the optional SmarTechnology䋢 Y-connector, or a customer supplied 18-gauge insulted wire.
Part 1510-12 includes the Model 1510 charger/maintainer/desulfator, ring terminal assembly with quick connector, insulated battery clips, ambient temperature sensor (installed), 12-foot power cord, and optional permanent mounting tab.
友情提醒：件号：1510 相关介绍完善中 / 部分技术参数正在核实，当前信息仅供参考，最终订货请以实际件号、原厂资料及 IPC 手册为准。
规格：
Weight:
<1 lb
Dimensions:
3.9 x 2.55 x 1.18 in
Voltage:
12V
Charging Current:
1.5 amp
Power Source:
90 - 240 VAC @ 47 - 63 Hz
Temperature Compensation:
yes, -4°F to 122°F (-12°C to 50°C)
Operating Temperature:
14°F to 104°F (-10°C to 40°C)
Storage Temperature:
-13°F to 185°F (-25°C to 85°C)
Operating Humidity:
0 to 90% relative humidity
Overcharge Protection:
yes
Polarity Reversal Protection
yes
Multiple Batteries (#):
4
Works with all types sizes, types, and brands of 12V flooded (filler cap) and sealed maintenance free batteries
Includes ambient temperature sensor (installed), 12 ft power cord, battery clip cord set with quick connector, and optional permanent mounting tab
Safety Standards:
Complies with the requirements of the Standard(s) for Battery Chargers (UL-1236) and is identified with the ETL Listed Mark
EMC Standard:
FCC part 15
Input-Output insulation test:
1,240VAC @ 60Hz
5mAac, no breakdown
特征：
Ambient temperature sensor ensures the battery will not over- or undercharge regardless of extreme temperatures
Extends battery life up to four times
Maintains up to four batteries at a time (6 or 12 volt connected in parallel); requires optional Y-adaptor
Wide input voltage range from 90-240 VAC and 47-63 Hz allows users to use the Model 1510 worldwide
Recovers weak batteries
Automatic, full-time, high frequency pulse type desulfation
Reverse polarity, short circuit, and over-temperature protection
Ideal use with flooded, sealed, maintenance-free, starter, deep-cycle, Optima brand sealed AGM, and marine batteries (not for use with aviation batteries)
FCC certified and Energy Star rated
|
