Unshielded cable clamps allow the cable to exit the back shell at a straight/90° angle. They can be used with on either plugs or receptacles and will not interfere with commonly used hardware such as male screw retainers, female screw locks, or spring latches and latching blocks. The hinged assembly allows for easy installation over a wire harness.
This 15-positions, unshielded cable clamp kit(EDMO# 207467-1) features a #1 shell size, and a 2-entry cable angle to provide a straight or 90° cable exit for 9-position connectors
友情提醒：产品介绍及参数仅供参考，如需该件号：207467-1 的详细技术规格，请随时联系我们>>>，航空器材网将为您提供精准的技术支持和解决方案。
规格：
Dimensions:
0.755 x 0.630 in (19.18 x 16 mm)
Cable Diameter:
4.06 mm
Cable Entry Angle:
Variable (Straight/90°)
Connector Type:
D-Sub backshells
Number of Cable Entry:
2
Number of Positions:
9-positions
Shell Size:
1(E)
Shell Material:
thermoplastic
Shell Plating:
plastic
特征：
Thermoplastic unshielded, clamp shell housing
Variable cable entry angle – straight or 90°
Adjustable screws can tightness cable strain reliefs
Cable clamp kit assemblies include hardware for convenient plug/receptacle mating
