The MaxPulse landing light controller is a solid state, compact and lightweight lighting controller. It features dual channels and provides Wig Wag and multiple rate control for any combination of LED, incandescent, and HID landing lights. The MaxPulse has an eight position function mode switch.
This MaxPulse landing light control unit (EDMO# 9200-000-A) has spade terminals and a 10A max current rating.
友情提醒：产品介绍及参数仅供参考，如需该件号：9200-000-A 的详细技术规格，请随时联系我们>>>，航空器材网将为您提供精准的技术支持和解决方案。
规格：
Weight:
1 oz
Dimensions:
Panel label: 1.6 x 1.6 in
Control unit: 1.27 in, diameter
Voltage range:
12 VDC to 28 VDC
Max current:
10 A
Operating temperature:
-30°C to 85°C
Internal Temperature Protection:
85°C
Storage Temperature:
-40 to 100°C
Maximum Internal Temperature:
+25°C at 10 A
特征：
MaxPulse Landing Light Controller with spade or ring terminals
Greatly increases the visibility of the aircraft in both daylight and nighttime operations which improves the safety of the flight
Compact, lightweight, powerful, solid state reliability to give that Wig-Wag effect
No outboard heat sinks or rheostats
Works with all major brands of lights
Gives the operator complete control over his landing light and/or taxi light
Many settings to choose from
X – both circuits are off
S – Starboard/Right on only
P – Port/Left on only
S+P – Both circuits on
A44 – Alternate at 44 PPM (STD)
B44 – Both flash at 44 PPM
A88 – Alternate at 88 PPM
A120 – Alternate at 120 PPM
FAA STC/PMA approved, with extensive AML
RTCA/DO-160E Qualified
Comes with MaxPulse unit, installation instructions, spade or ring terminals, placard, drill guide, and knob
